Jailbreak iPhone 5s, 5c, 5, 4s, 4 IOS 7 through Evasi0n7

How to Jailbreak iPhone 5s, 5c, 5, 4s, 4 through Evasi0n on IOS 7.0 TO 7.0.6

Instructions to Follow : on Mac & Windows OS

iPhone should be on latest iOS7 (the one which can be jailbreak). Rightnow iPhone can be jailbreak till firmware v7.0.6

First Step: Make sure no passcode lock should be there on your device. 
Second Step: Connect your iPhone to iTunes and do the backup.
Third Step: Download Evasi0n7 & iOS 7 latest firmware.
Forth Step: Upgrade your iPhone to the latest firmware before starting jailbreak procedure. In this tutorial we are upgrading and jailbreaking iPhone iOS to firmware v7.0.6 .
Fifth Step: Now connect your iPhone to computer and open the Evasi0n7 application and click on Jailbreak. (The app will retrieve information from the device to generate jailbreak data, upload jailbreak data, inject evasi0n app 1, inject evasi0n app 2, configuring system 1, configuring system 2, and then reboot.)
Sixth Step: You will be asked to open the Evasi0n app on iphone after it reboots.
Seventh Step: Now iPhone will reboot with Cydia on the springboard. Thats it your done !

Read More

How to Install SIRI on iPhone 4,3GS,iPad2,1 through External Servers

Read More

Jailbreak iPhone 4S and iPad 2 on Firmware 5.0.1

Steps on how to Jailbreak iPhone 4S and iPad 2 on Firmware 5.0.1


1. Download the Application which is only available for Mac till now. Application is named as Absinthe. You can Download this Absinthe from the link mentioned - link
2. The supported devices and firmware for Absinthe are:
iPhone 4S running iOS 5.0, 5.0.1 (9A405 and 9A406)
iPad 2 Wifi/GSM/CDMA running iOS 5.0.1
3. Run the File  Absinthe.app after double tapping it and it will look like...the picture mentioned below.

4. Just Remember to backup all your stuff before Jailbreaking your iPhone.
5. To back up go to Itunes and connect your iPhone and then on the left side where you can see your               iPhone detected in itunes. Right Click on that and click on backup.
6. Now after doing the backup of your iPhone 4S. Place your iPhone 4S into DFU mode. If you dont know how click on the link mentioned here - link


7. After placing your iPhone 4S into DFU mode go to that Application Absinthe and click on the button which has written Jailbreak on it. After that please wait for couple of minutes and then you are done.
8. You will get the Application named Absinthe on you iPhone 4S, now opened that application on your iPhone 4S and then download the Cydia application through it. When done you will get the Cydia on you iPhone 4S.


Do Remember it is just a Jailbreak not a Carrier unlock and please remove the passcode before doing the Jailbreak or else you will get the error message as mentioned in the picture. If you get any issues you can message me down below. i will reply. For now Chao !!!


Troubleshooting --

- Camera roll will be empty if the jailbreak is incomplete. Rerun the app once to fix, and then another time to complete Jailbreak.

- If the Absinthe webclip shows “Error establishing a database connection”, please go to Settings, turn on VPN and wait instead.

- The VPN connection will give an error. This is normal. A reboot should happen a few moments after the error.

- Just reboot and redo the jailbreak if you have problems.

- When jailbreaking: Do not have a passcode set. Do not have your own VPN setup (Absinthe needs to setup its own).

- If Absinthe crashes, reboot your DEVICE and try again.

- Toggle VPN only AFTER Absinthe says it’s done, or it will not work. VPN SHOULD error and then reboot soon. If it does not, rerun Absinthe!

Read More

Jailbeakme v3.0 for Apple Devices like iPhone, iPad & iPod.

JailbreakMe 3.0 is out now to jailbreak iPad 2 on iOS 4.3.3 firmware. Comex has finally released the most anticipated iPad 2 jailbreak “JailbreakMe 3.0″ to the general public. JailbreakMe also supports iPhone4, 3GS, iPod Touch 4G, 3G.

JailbreakMe is a userland jailbreak which is considered the easiest jailbreak solution available to date. In case of jailbreakMe, you just need to point the Safari browser on the targeted iPhone, iPad or iPod Touch to a specified URL (jailbreakme.com) and then Slide a slider to jailbreak, that’s it! Other jailbreak tools like RedSn0w, Sn0wbreeze, PwnageTool,  Greenpois0n involves numerous steps to complete the jailbreak process.

JailbreakMe 3.0 Supports:

• iPad 2 – (4.3.3)
• iPad 1 – (4.3 through 4.3.3)
• iPhone 4 – (4.3 through 4.3.3)
• iPhone 4 CDMA – (4.2.6 through 4.2.8)
• iPhone 3GS – (4.3 through 4.3.3)
• iPod Touch 4G – (4.3 through 4.3.3)
• iPod Touch 3G (4.3, 4.3.2, 4.3.3)

How to Jailbreak the Device:

Step 1

Download iOS 4.3.3

• Connect your iPhone to your computer and open iTunes;
• Select your iPhone from the left navigation pane under devices list in iTunes;
• Hold Down the Shift (Windows) or Alt/Option (Mac) key and click the Restore button;
• Browse and select the downloaded iOS 4.3.3 IPSW and restore it.

Step 2

• Make sure your iPhone 4 or iPhone 3GS is running iOS 4.3.3 and connected to internet;
• Open the Safari Browser from your iPhone Springboard;
• Input the following URL: www.jailbreakme.com

Step 3

• Tap on the Free button;
• Then Hit Install;
• Wait for the jailbreak process to complete.

Thta’s it! You’ve successfully jailbreak iPhone 4 4.3.3 / iPhone 3GS 4.3.3 with JailbreakMe userland jailbreak by Comex. 

Read More

Fix MobileSubstrate on iOS 4.3

Fix MobileSubstrate on iOS 4.3 after Jailbreak

Your iPhone, iPad, iPod Touch should already be jailbroken on iOS 4.3. 

Step 1

Download this: .deb file.

Step 2

SSH into iPhone, iPod Touch with WIN SCP
or
SSH into iPad

Step 3

Navigate to /var/root/Media/
and create a new folder named Cydia and inside Cydia folder, create a folder called AutoInstall (Folder names are Case-Sensitive)

Step 4

Now copy the downloaded .deb file inside the AutoInstall folder
and reboot your iDevice.

Read More

New WhiteD00r Firmware v4.2 for iPhone 2G, 3G & iPod Touch 1G, 2G.

FEATURES OF NEW WHITED00R FIRMWARE V4.2 FOR IPHONE & IPOD.

1. 

iOS4 User Interface

Whited00r firmwares are based on 3.1.x firmware but it offers a fully modded interface to suite iOS4 one. We are not using Winterboard to achieve this result, so your device will run faster! Unfortunately this firmware can't run iOS4-only applications.

2.

Unlocked

All Whited00r firmwares are jailbroken (with PwnageTool). Latest Cydia is included and fully working. You will find our repo preinstalled. We are also providing unlocked firmwares that include carrier unlock and hacktivation.

3.

Multitasking and Folders

Whited00r firmwares included multitasking and folders. They have been developed by Darlo770. Multitasking is optimized to run on "old" devices with limited ram amount. iPod controls on multitasking dock are working too.

4.

Wallpapers

Whited00r comes with the new iOS4 feature of Home Screen wallpapers. You can easly set it like in iOS4. Moreover, whited00r has the feature of dynamic wallpapers: you can use high resolution images to set Android-like wallpapers.

5.

Native unlocked features

Whited00r unlocks all native features hidden in official Apple firmwares. Battery percentage, Multimedia Messages Service (MMS), tethering via bluetooth and via USB, Tap to Focus in camera, cellular data network fields and Emojii icons are only some examples.

6.

Video Recording

Whited00r includes the best video recording application. It offers the best quality for your videos. Recording quality is better then the one offered by application on AppStore. Moreover video are automatically exported to Photo folder (so you can manage them with iPhoto)

7.

Safari Bookamrks

The Safari browser offers two useful bookmarks: "Search in Page" and a "Flash video converter". The latter enables some kind of flash video in the page you are visiting (like Vimeo or Dailymotion videos). From bookmarks you can also visit the mobile version of whited00r.com and install alphanumeric passcode for your device.

8.

Others Features

You will find other minor features that are not listened here. Whited00r is compatible with iBluenova, A2DP enabler and iBootlace for Andorid installation (dual boot). Visit the forum via "More info" button for power user tweaks.

9.

Whited00r is Free

Whited00r is 100% free and will never use cracked software. Our project is kept alive by donations and sponsors. Please help us! Use "More info" button to donate

GO AND DOWNLOAD ALL FIRMWARES WITH DROP DOWN MENUS HERE - 

http://www.whited00r.com/downloads.html

Read More

Whited00r iPhone Firmware v4.0 Features

Read More

WhiteD00r came out with New Version iPhone Firmware v3.4 2G/3G

WhiteD00r Latest Version Firmware for iPhone 2G/3G.

iPhone 3G

  No Activation v3.3: most users should use this firmware version (if you have the legit sim-card for activation via iTunes)

  No Activation v3.4:: latest release but Location is bugged. Use this if you have the legit sim-card for activation via iTunes

  Hacktivated v3.3: use this firmware version if you iPhone is foreign. Then use ultrasn0w to unclok for all carriers

 Hacktivated v3.4: latest release but Location is bugged. Then use ultrasn0w to unclok for all carriers

iPhone 2G

Hacktivated v3.3: most users should use this firmware version. It unlocks your iPhone for all carriers

  Hacktivated v3.4: latest release but Location is bugged. It unlocks your iPhone for all carriers

  No Activation v3.3: use this only if you have the legit sim-card for activation via iTunes (no for foreign iPhones)

No Activation v3.4: latest release but Location is bugged. use this only if you have the legit sim-card for activation

                                                                                           

Read More

Ultrasn0w Unlock v1.1.2 out for iPhone Firmware 4.2.1 3GS & 3G

As per the Dev Team the new Ultrasn0w Unlock for IOS4 firmware v4.2.1 is released. Please go through the instructions provided by the Dev Team below :

" Today we’re pleased to announce our free carrier unlock for iPhone3G/3GS owners with a baseband later than 05.13.04 ".  The unlock for that baseband exploited the AT+XAPP command, thanks to a crash initially discovered by @sherif_hashim (@Oranav also found this crash).  So what hole are we exploiting today, since Apple closed that AT+XAPP hole?  Well, we’re exploiting the exact same hole!

It turns out that the very first iPad firmware 3.2.2 has baseband version 06.15.00 still vulnerable to AT+XAPP.  The iPad baseband is built for the exact same baseband chip as the iPhone3G/3GS — they’re fully compatible! Some of us have been running 06.15 for weeks now on our iPhones in preparation for this release.

Since 06.15 is a higher version than 05.14 or 05.15 (where AT+XAPP is gone), anyone stuck at those versions can simply upgrade to 06.15 to unlock again!  Luckily for us, Apple *still* provides the iPad FW 3.2.2 with this vulnerable baseband right from their own servers. (Grab it now, before they take it down!)

We’ve been busy updating both PwnageTool and redsn0w to make the baseband update as seamless as possible.

1. First up is “PwnageTool 4.1.3 Unlock Edition”.  It has a special dialog box which will ask you if you want to update to the iPad baseband.  You must already have the iPad 3.2.2 IPSW on your computer (see the above link)….so just point PwnageTool at it (or let it find it on its own if you’re in “simple” mode).
2. Directly after PwnageTool 4.1.3 is available, the official ultrasn0w repohttp://repo666.ultrasn0w.com will be updated with ultrasn0w 1.2, which covers iPhone 4 baseband 01.59.00 and iPhone 3G/3GS basebands 04.26.08, 05.11.07, 05.12.01, 05.13.04 and now 06.15.00.
3. Finally, we’ll release an update to redsn0w today for those without Macs and can’t run PwnageTool.  The new redsn0w will give you the option to update your baseband to 06.15 too.

WARNING — YOU DO THIS AT YOUR OWN RISK!  PLEASE UNDERSTAND THE CONSEQUENCES OF UPDATING TO 06.15.

1. There is no way to come back down from 06.15, and there’s no hiding the baseband version from Apple.  You’ll be voiding your warranty in a very obvious way.
2. If some future baseband comes out with a critical fix, you won’t be able to update to it if it remains down in the 05.xx sequence (then again, you wouldn’t update to it if you wanted to keep your unlock anyway).
3. Starting with FW 4.2.1 if you have 06.15 on your iPhone you won’t ever be able to restore to stock firmware (it will fail).  You’ll need to only restore to custom IPSWs (then again, if you’re unlocker you should already be doing that).

Certainly don’t update to 06.15 if you don’t need to!  Only do this if you need the unlock and you’re stuck on 05.14 or 05.15, and you’re willing to assume the above risks.

This PwnageTool also contains a 4.2.1 bundle for iPhone3G owners…for all else, it’s still only 4.1.  If you have an iPhone3GS with an old bootrom, the new redsn0w will handle 4.2.1 for you (in fact it covers 4.2.1 for all devices, even though some of them are still tethered at 4.2.1 until @comex can work some untethering magic).  iPhone3GS users with old bootroms who want to go to 4.2.1 should not use this PwnageTool! Update to stock 4.2.1 first, then use the upcoming redsn0w to update your baseband.

Please feel free to use our comments section for questions.  We have some very knowledgeable and helpful moderators:  angiepangie, Confucious, dhlizard, and Frank55!

Official Bittorrent Releases

PwnageTool 4.1.3  - PwnageTool_4.1.3_Unlock_Edition.dmg.5994102.TPB.torrent

Read More

Android 2.2.1 (Froyo) on iPhone 3G / 2G with Bootlace

How to install Android 2.2.1 Froyo on iPhone using Bootlace without a computer. Bootlace 2.1 lets you install Android 2.2.1 on iPhone 3G / iPhone 2G without any need of a computer using an installer available in Cydia.

Requirements

• iPhone 3G: iOS 4.1, 4.0.1, 4.0.2, 4.0, 3.1.3 and 3.1.2, , 4.0, .1, 4.0.2.
• iPhone 2G: iOS 3.1.3 and 3.1.2.
• Your iPhone Must be jailbroken. Bootlace currently supports the following Jailbreak tools:
• PwnageTool
• RedSn0w
• Blackra1n

How to Install Android on iPhone using Bootlace

We assume that your iPhone 3G/2G is already jailbroken using the above mentioned jailbreak tools.

Step 1

Open Cydia. Go to Manage > Sources and add the following Source/repo:

http://repo.neonkoala.co.uk

Step 2

Once you’ve added the above mentioned repo, go to Search tab, search for Bootlace and install it.

Step 3

• When done, press the Home button to close Cydia. Now open Bootlace from your iPhone Springboard.
• Bootlace will download the kernel and patch it then.
• Once done, Reboot your iPhone.

Step 4

• Open Bootlace. Hit the OK button.
• Select iDroid tab at bottom and then hit the Install button.

Step 5

Tap the OK button. Bootlace will download and install android on iPhone.

Step 6

Once the Android installation process is completed, go to OpeniBoot tab at bottom and hit the install button.

Step 7

• Once done, tap on the Configure button.
• Make your choice, and hit save button.

Go to Quickboot tab and tap on Android to boot your iPhone into Android 2.2.1 Froyo.

Future Android for iPhone updates can be found under iDroid tab (Step 4).

• 
  

Read More

AppSync 4.1 for iOS 4.1 Firmware

Install AppSync 4.1 for iOS 4.1 Firmware

1. Assuming that you’ve already jailbroken iOS 4.1, Simply go to Cydia.
2. Add the following source: http://cydia.hackulo.us 
3. Now search for AppSync for OS 4.1 in Cydia.
4. Install AppSync for OS 4.1

Installing AppSync will patch MobileInstallation on iOS 4.1 and let you install cracked apps (.ipa) on your iPhone and iPod Touch.

Read More

How to Run VodaFone Live(Edge) on iPhone

Step 1: Jailbreak your iPhone. You must have “Cydia” application on your phone.

Step 2: Install “Winterboard” from Cydia as step-by-step displayed by images below.

Step 3: Reboot the device after installation as needed.

Step 4: Add new source “cydia.xsellize.com” to cydia following below images.

Step 5: Search and install “Supreme Preferences 3.0″ from cydia.

Step 6: Once installed “Winterboard” and “Supreme Preferences”, open the “Winterboard” application.

Step 7: Enable the “Summerboard Mode” option by making it ON.

Step 8: Go to “Select Themes” and enable “Supreme Preferences 3.0″ option checked.
Step 9: Go back to previous tab and select “Respring” button. iPhone will re-spring.
Step 10: Now go to “Settings” -> “Supreme preferences” -> “Applications” -> “Phone” and make “Celluar Data tab” ON.
Step 11: Once enabling it, Go to “Settings” -> “General” -> “Network” and you should find “Cellular Data” option there. Enable the same.

Step 12: Now Go to “Cellular Data Network Tab” and set the APN as “iphone” (without quotes as shown below). Keep other fields blank.

Step 13: That’s It. Now disable the WiFi, Open Safari and try to access an Internet on Edge. You should be able to open your favorite website.

Read More