Jailbreak iPhone 5s, 5c, 5, 4s, 4 IOS 7 through Evasi0n7

How to Jailbreak iPhone 5s, 5c, 5, 4s, 4 through Evasi0n on IOS 7.0 TO 7.0.6

Instructions to Follow : on Mac & Windows OS

iPhone should be on latest iOS7 (the one which can be jailbreak). Rightnow iPhone can be jailbreak till firmware v7.0.6

First Step: Make sure no passcode lock should be there on your device. 
Second Step: Connect your iPhone to iTunes and do the backup.
Third Step: Download Evasi0n7 & iOS 7 latest firmware.
Forth Step: Upgrade your iPhone to the latest firmware before starting jailbreak procedure. In this tutorial we are upgrading and jailbreaking iPhone iOS to firmware v7.0.6 .
Fifth Step: Now connect your iPhone to computer and open the Evasi0n7 application and click on Jailbreak. (The app will retrieve information from the device to generate jailbreak data, upload jailbreak data, inject evasi0n app 1, inject evasi0n app 2, configuring system 1, configuring system 2, and then reboot.)
Sixth Step: You will be asked to open the Evasi0n app on iphone after it reboots.
Seventh Step: Now iPhone will reboot with Cydia on the springboard. Thats it your done !

Read More

Downgrade iPhone 3GS / 3G 06.15.00 To 05.13.04 Baseband

Please Follow the steps mentioned below:-

Step 1: Download the latest version of Redsn0w, which is 0.9.14b1 (Windows/Mac), make sure that you have the correct version of said tool for your operating system.

Step 2: Unzip the contents of the downloaded compressed file and save to a familiar location on your PC or Mac.

Step 3: Download the IPSW file of iOS which is currently running on your device, use the search bar on the right-hand side of this post to hunt for the required files. Once downloaded and saved to a safe location, move to the next step.

You can check which version of iOS you are running by going to Settings > General > About > Version.

Step 4: Launch Redsn0w and click on the Extras button on screen.

Step 5: Now click on the Select IPSW option. Point Redsn0w towards the IPSW file which you downloaded in Step 3. If you’re already running iOS 5.1.1, then point it towards that said firmware and so on. Click on Open when you’ve found the required IPSW.

Step 6: Redsn0w will now ask you whether if you have an older bootrom iPhone 3GS or a new one, read the on-screen instructions very, very carefully before you proceed, as it may potentially lead to the loss of data on your device, or may even brick your device’s radio for good.

Step 7: Now go back to the main screen of Redsn0w and click on the Jailbreak option. After preparing the jailbreak data – which takes a little while – you will be presented to a set of different options.

Step 8: Simply check the Downgrade from iPad baseband and Install Cydia options and click Next. If you’re already jailbroken and have Cydia installed then you do not have to check the Install Cydiaoption.

Step 9: At this point, make sure your device is powered off and unplugged. Read the on-screen instructions on how to put your device in DFU mode, don’t worry it might take a couple of tries to get it right. Once you’re ready, click Next.

Step 10: When you’re into DFU mode, Redsn0w will do it’s thing and proceed with the downgrade of your baseband, don’t be alarmed as this step might take a while, so be patient. And best of all; do not touch your device during the whole downgrade process.

Step 11: If you followed the steps correctly, your iPhone will reboot and will be on the unlockable 05.13.04 baseband. Simply launch Cydia and use the latest version of Ultrasn0w to unlock your device.

Note: Before you begin, it’s necessary to note that this method will only work on devices which are running the 06.15.00 baseband i.e. iphone 3GS/3G.

Read More

How to Install SIRI on iPhone 4,3GS,iPad2,1 through External Servers

Read More

How to Install SIRI on iPhone 4 using iPhone 4S

How to Install SIRI on iPhone 4 using iPhone 4S

Read More

Jailbreak iPhone 4S and iPad 2 on Firmware 5.0.1

Steps on how to Jailbreak iPhone 4S and iPad 2 on Firmware 5.0.1


1. Download the Application which is only available for Mac till now. Application is named as Absinthe. You can Download this Absinthe from the link mentioned - link
2. The supported devices and firmware for Absinthe are:
iPhone 4S running iOS 5.0, 5.0.1 (9A405 and 9A406)
iPad 2 Wifi/GSM/CDMA running iOS 5.0.1
3. Run the File  Absinthe.app after double tapping it and it will look like...the picture mentioned below.

4. Just Remember to backup all your stuff before Jailbreaking your iPhone.
5. To back up go to Itunes and connect your iPhone and then on the left side where you can see your               iPhone detected in itunes. Right Click on that and click on backup.
6. Now after doing the backup of your iPhone 4S. Place your iPhone 4S into DFU mode. If you dont know how click on the link mentioned here - link


7. After placing your iPhone 4S into DFU mode go to that Application Absinthe and click on the button which has written Jailbreak on it. After that please wait for couple of minutes and then you are done.
8. You will get the Application named Absinthe on you iPhone 4S, now opened that application on your iPhone 4S and then download the Cydia application through it. When done you will get the Cydia on you iPhone 4S.


Do Remember it is just a Jailbreak not a Carrier unlock and please remove the passcode before doing the Jailbreak or else you will get the error message as mentioned in the picture. If you get any issues you can message me down below. i will reply. For now Chao !!!


Troubleshooting --

- Camera roll will be empty if the jailbreak is incomplete. Rerun the app once to fix, and then another time to complete Jailbreak.

- If the Absinthe webclip shows “Error establishing a database connection”, please go to Settings, turn on VPN and wait instead.

- The VPN connection will give an error. This is normal. A reboot should happen a few moments after the error.

- Just reboot and redo the jailbreak if you have problems.

- When jailbreaking: Do not have a passcode set. Do not have your own VPN setup (Absinthe needs to setup its own).

- If Absinthe crashes, reboot your DEVICE and try again.

- Toggle VPN only AFTER Absinthe says it’s done, or it will not work. VPN SHOULD error and then reboot soon. If it does not, rerun Absinthe!

Read More

Jailbeakme v3.0 for Apple Devices like iPhone, iPad & iPod.

JailbreakMe 3.0 is out now to jailbreak iPad 2 on iOS 4.3.3 firmware. Comex has finally released the most anticipated iPad 2 jailbreak “JailbreakMe 3.0″ to the general public. JailbreakMe also supports iPhone4, 3GS, iPod Touch 4G, 3G.

JailbreakMe is a userland jailbreak which is considered the easiest jailbreak solution available to date. In case of jailbreakMe, you just need to point the Safari browser on the targeted iPhone, iPad or iPod Touch to a specified URL (jailbreakme.com) and then Slide a slider to jailbreak, that’s it! Other jailbreak tools like RedSn0w, Sn0wbreeze, PwnageTool,  Greenpois0n involves numerous steps to complete the jailbreak process.

JailbreakMe 3.0 Supports:

• iPad 2 – (4.3.3)
• iPad 1 – (4.3 through 4.3.3)
• iPhone 4 – (4.3 through 4.3.3)
• iPhone 4 CDMA – (4.2.6 through 4.2.8)
• iPhone 3GS – (4.3 through 4.3.3)
• iPod Touch 4G – (4.3 through 4.3.3)
• iPod Touch 3G (4.3, 4.3.2, 4.3.3)

How to Jailbreak the Device:

Step 1

Download iOS 4.3.3

• Connect your iPhone to your computer and open iTunes;
• Select your iPhone from the left navigation pane under devices list in iTunes;
• Hold Down the Shift (Windows) or Alt/Option (Mac) key and click the Restore button;
• Browse and select the downloaded iOS 4.3.3 IPSW and restore it.

Step 2

• Make sure your iPhone 4 or iPhone 3GS is running iOS 4.3.3 and connected to internet;
• Open the Safari Browser from your iPhone Springboard;
• Input the following URL: www.jailbreakme.com

Step 3

• Tap on the Free button;
• Then Hit Install;
• Wait for the jailbreak process to complete.

Thta’s it! You’ve successfully jailbreak iPhone 4 4.3.3 / iPhone 3GS 4.3.3 with JailbreakMe userland jailbreak by Comex. 

Read More

iPhone Themes Store via Cydia

How to get Themes on iPhone

1. Launch Cydia
2. Go to the Manage tab
3. Tap on “Sources”
4. Now hit the “Edit” and then “Add” buttons.
5. Input the following repo url : http://www.themeitapp.com/repo .
6. Now go to your just added repository and download Theme it.app and start enjoying great themes.

Read More

Restore & Update iPhone 3G To 4.2.1 On 6.15.00 Baseband

Follow the steps mentioned below.


Things you need to proceed:-


1> iPhone 3G 4.2.1 Original Firmware
2> iPhone 3G 4.2.1 Custom Firmware
3> Redsn0w 0.9.6.b6

This steps are only valid  when you wanna Restore A Bricked 3G new or Old Bootrom And Can Also Update Your Working 4.1 iPhone 3G To 4.2.1 On 6.15.00 Baseband.


IF Your iPhone Is Not On 6.15.00 Baseband OR Has Not Crashed While Installing It Then theses steps are not valid.


Steps :-


1. If Updating Or Restoring To 4.2.1 Open Redsn0w And Select The Official Firmware, Then Deselect ALL Options And Only Check "Just Enter Pwned DFU Mode Right Now"

2. Once Finished, Open iTunes And Hold Shift Or Option On Mac And Left Click Restore In iTunes, Then Select The 4.2.1 Custom Restore File For 3G ( Depending On Your Device)

3. Open Cydia And Install Ultrasn0w To Unlock! That's It you are done.... 




PLEASE Subscribe And Rate :)

Read More

Ultrasn0w Unlock v1.1.2 out for iPhone Firmware 4.2.1 3GS & 3G

As per the Dev Team the new Ultrasn0w Unlock for IOS4 firmware v4.2.1 is released. Please go through the instructions provided by the Dev Team below :

" Today we’re pleased to announce our free carrier unlock for iPhone3G/3GS owners with a baseband later than 05.13.04 ".  The unlock for that baseband exploited the AT+XAPP command, thanks to a crash initially discovered by @sherif_hashim (@Oranav also found this crash).  So what hole are we exploiting today, since Apple closed that AT+XAPP hole?  Well, we’re exploiting the exact same hole!

It turns out that the very first iPad firmware 3.2.2 has baseband version 06.15.00 still vulnerable to AT+XAPP.  The iPad baseband is built for the exact same baseband chip as the iPhone3G/3GS — they’re fully compatible! Some of us have been running 06.15 for weeks now on our iPhones in preparation for this release.

Since 06.15 is a higher version than 05.14 or 05.15 (where AT+XAPP is gone), anyone stuck at those versions can simply upgrade to 06.15 to unlock again!  Luckily for us, Apple *still* provides the iPad FW 3.2.2 with this vulnerable baseband right from their own servers. (Grab it now, before they take it down!)

We’ve been busy updating both PwnageTool and redsn0w to make the baseband update as seamless as possible.

1. First up is “PwnageTool 4.1.3 Unlock Edition”.  It has a special dialog box which will ask you if you want to update to the iPad baseband.  You must already have the iPad 3.2.2 IPSW on your computer (see the above link)….so just point PwnageTool at it (or let it find it on its own if you’re in “simple” mode).
2. Directly after PwnageTool 4.1.3 is available, the official ultrasn0w repohttp://repo666.ultrasn0w.com will be updated with ultrasn0w 1.2, which covers iPhone 4 baseband 01.59.00 and iPhone 3G/3GS basebands 04.26.08, 05.11.07, 05.12.01, 05.13.04 and now 06.15.00.
3. Finally, we’ll release an update to redsn0w today for those without Macs and can’t run PwnageTool.  The new redsn0w will give you the option to update your baseband to 06.15 too.

WARNING — YOU DO THIS AT YOUR OWN RISK!  PLEASE UNDERSTAND THE CONSEQUENCES OF UPDATING TO 06.15.

1. There is no way to come back down from 06.15, and there’s no hiding the baseband version from Apple.  You’ll be voiding your warranty in a very obvious way.
2. If some future baseband comes out with a critical fix, you won’t be able to update to it if it remains down in the 05.xx sequence (then again, you wouldn’t update to it if you wanted to keep your unlock anyway).
3. Starting with FW 4.2.1 if you have 06.15 on your iPhone you won’t ever be able to restore to stock firmware (it will fail).  You’ll need to only restore to custom IPSWs (then again, if you’re unlocker you should already be doing that).

Certainly don’t update to 06.15 if you don’t need to!  Only do this if you need the unlock and you’re stuck on 05.14 or 05.15, and you’re willing to assume the above risks.

This PwnageTool also contains a 4.2.1 bundle for iPhone3G owners…for all else, it’s still only 4.1.  If you have an iPhone3GS with an old bootrom, the new redsn0w will handle 4.2.1 for you (in fact it covers 4.2.1 for all devices, even though some of them are still tethered at 4.2.1 until @comex can work some untethering magic).  iPhone3GS users with old bootroms who want to go to 4.2.1 should not use this PwnageTool! Update to stock 4.2.1 first, then use the upcoming redsn0w to update your baseband.

Please feel free to use our comments section for questions.  We have some very knowledgeable and helpful moderators:  angiepangie, Confucious, dhlizard, and Frank55!

Official Bittorrent Releases

PwnageTool 4.1.3  - PwnageTool_4.1.3_Unlock_Edition.dmg.5994102.TPB.torrent

Read More

FolderEnhancer supports iOS 4.1 firmware

FolderEnhancer has been updated to now supports iOS 4.1 firmware. FolderEnhancer is a jailbroken tweak which brings some cool improvements to the iOS folders capability.

iOS 4 brought with it the ability to put apps and bookmarks into folders. Unfortunately, the implementation is quite limited. FolderEnhancer takes this feature and improves upon it, making it a viable solution for organizing and accessing your apps.

FolderEnhancer Features

• Open folders faster.
• Add up to 320 icons to a folder (20 pages, 16 per page).
• Create folders inside of folders.
• Create folders on the dock.
• Supports Iconoclasm for custom layouts inside of folders.
• Extends MultiIconMover to allow moving multiple icons into/out of folders.
• Options include hiding the folder name and wallpaper, as well as disabling animations.

What’s New In This Version

• NEW: Added support for iOS 4.1.
• FIX: With “Close on App Launch” OFF, closing an app launched from a folder while the task switcher was visible would cause the folder to fail to reappear.
• FIX: With wallpaper off, toggling the task switcher would cause parent folders to become visible, appear stacked.

You can purchase and download FolderEnhancer from the Cydia Store for $1.99. CategoriesSB owners can get the app at $0.99 until the end of October.

Read More

Jailbreak iPhone 4, 3GS iOS 4.1 with Limera1n

Geohot has released Limera1n, the iOS 4.1 jailbreak for iPhone 4, iPhone 3GS, iPad and iPod Touch 4G, iPod Touch 3G. Download Limera1n jailbreak from the link below. Limera1n is an untetheredjailbreak for iOS 4.1 on iPhone 4, 3GS, iPad and iPod Touch 4G, 3G.

Limera1n Supports:

• iPhone 4
• iPhone 3GS (New bootrom support broken > Fix pending)
• iPad
• iPod Touch 4G
• iPod Touch 3G

Limera1n is currently available for Windows OS only. Mac and Linux version will be out soon.

How to Jailbreak iPhone 4, 3GS iOS 4.1 with Limera1n

Step 1

Download Limera1n

Step 2

Execute the downloaded Limera1n.exe and hit the make it ra1n button

Step 3

Now connect your iPhone 4 / iPhone 3GS

Your device will go into Recovery Mode

Step 4

Hold down the Home + Power buttons.

Release the Power button and keep holding the Home button.

You iPhone 4/3GS will now be in DFU Mode. Then Limera1n logo will appear on your iPhone screen.

The follow message will appear when Limera1n is done with the jailbreak process

Step 5

Open the Limera1n app from your iPhone home screen and install Cydia from there. Once Cydia is installed, Reboot your iPhone and you’re Done!

That's it Done !

Read More

AppSync 4.1 for iOS 4.1 Firmware

Install AppSync 4.1 for iOS 4.1 Firmware

1. Assuming that you’ve already jailbroken iOS 4.1, Simply go to Cydia.
2. Add the following source: http://cydia.hackulo.us 
3. Now search for AppSync for OS 4.1 in Cydia.
4. Install AppSync for OS 4.1

Installing AppSync will patch MobileInstallation on iOS 4.1 and let you install cracked apps (.ipa) on your iPhone and iPod Touch.

Read More

How to Install the Flash on iPhone iOS4

Simple Steps to install Flash on iPhone

Step 1. Launch the Cydia App on your iPhone

Step 2. On the Cydia screen, at the bottom you will see 4 options:

• Cydia
• Sections
• Changes
• Manage and
• Search

Choose the Manage tab and you will be presented with 3 options on the screen.

• Packages
• Sources
• Storage

Choose the Sources tab and tap “Edit” and then “Add”. You will be prompted to enter a URL. Type

• http://repo.benm.at

and click Add Source.

Step 3. Once the Installation is complete and above Repo has been added, Simply Search for ‘Frash’ in Cydia and Install it and reboot your iPhone and you would have Flash 10.1 Installed on your Device and you can browse the Flash content on your iPhone Safari Browser. 

Read More

Project iOS4

The purpose of project "i0S4" is modify a 3.1.3 version simulating the Apples iOS4, on iDevices that are not supported as the iPhone 2G and iPod Touch 1G , and in iDevices that is not loaded or not functioning properly those functions as the iPhone 3G.

This project runs parallel to Whited00r, the most important differences are:

whited00r: The tool for building an IPSW PwangeTool based on 3.1.5, which adds additional features to regular PwnageTool. Once created IPSW restore and set up your iPhone as a brand new, still can not find the fix to support from the backup. (Author Mattewre).
.
i0S4: Modding your atctual Firmware through Debians (executable files compatible with Cydia). It has the advantage of installing or uninstalling our iOS4 features without need to restore your iPhone / iPod. (Author Fernas).

I0S4 ScreenShots:

SpringBoard;





Inside Folders;



Multitasking:



Information system;

Packages (contents of i0S4):

i0S4 AppSync
Install only if you have installed "i0S4 System"
i0S4 Battery
i0S4 Camera New
i0S4 DeleteWormIke New
i0S4 Installous
Install only if you have installed "i0S4 System"
i0S4 Internet
i0S4 Emoji
i0S4 Folders:
i0S4 Folders Expansion New
i0S4 MMS
Only for original 3.1.3i0S4 Multitask
i0S4 Overcloaking New
i0S4 Reflective New
i0S4 SetWallpaper New
i0S4 System
i0S4 Theme
i0S4 Wallpapers1
i0S4 Wallpapers1
i0S4 Wallpapers1


REMEMBER: T O INSTALL ANY PACKAGE YOU FIRST NEED ADD FERNAS REPO IN CYDIA


Installation of i0S4 features are simple and easy for everyone :


Instructions:

1. Open Cydia (iPhone/iPod)

2. Go to "Manage"

3. Click "Edit" --> ADD

4. Type :

http://cydia.myrepospace.com/fernas

5. After a refresh you can see, select and install the package you want!.

Read More

Jailbreak Your iPhone 4.0.0 & 4.0.1 Using JailbreakMe by Comex

Video to JailBreak iPhone Firmware v4.0.0 & 4.0.1 by Comex !
This method is only possible when u are able to run safari on iPhone. if you are in the locked screen or u have new iPhone you need to wait a while till Dev Team uploads there new tool which works on Windows.





Step One
Press to launch Safari from your Springboard.


Step Two
Press to select the address bar and input http://jailbreakme.com then press the Done button.


Step Three
To begin the jailbreak simply move the slider to right.


Step Four
You will be displayed a status bar as the download progresses.


Step Five
Once the download is complete the jailbreak process will begin


Step Six
Once you are notified that the jailbreak process is complete press the OK button.


Press the Home button to reveal Cydia on your desktop!


Congratulations you are done! continue by installing UltraSn0w to unlock you device. iPhone 4 users still need to wait a bit for an UltraSn0w update which will arrive shortly.

Read More