How to upgrade a previously jailbroken iPhone to iOS 6 and preserve the baseband.

Steps to upgrade iPhone 3GS/3G to Firmware IOS6.

Step 1: Upgrade your Itunes to latest.
Step 2: Backup your iPhone to Itunes.
Step 3: Download the latest Redsn0w version i.e.  Mac OSX   or  Windows
Step 4: Run your Redsn0w latest version and click on option [ Extras ].
Step 5: Your iPhone should be at firmware version 5.1.1.
Step 6: Select [ Even More ] and then [ Restore ]
Step 7: After that select [ IPSW ] i.e. firmware version 6.0.1 (which needs to be downloaded in advance).
Step 8: Select [ Yes ] to Preserve Baseband update.
Step 9: Now get the device connected to DFU mode.
Step 10: With the iPhone connected and switched off, when you click on next you go through DFU mode.
Step 11: Redsn0w will prepare a  restore image and restore it to the iPhone while preserving the basebands.
Step 12: At last the iPhone gets restore to Firmware version 6.0.1 with baseband version 5.13.00
Step 13: After this you just need to Jailbreak your iPhone and unlock it if required.

Thats it you are all set !

Read More

Downgrade iPhone 3GS / 3G 06.15.00 To 05.13.04 Baseband

Please Follow the steps mentioned below:-

Step 1: Download the latest version of Redsn0w, which is 0.9.14b1 (Windows/Mac), make sure that you have the correct version of said tool for your operating system.

Step 2: Unzip the contents of the downloaded compressed file and save to a familiar location on your PC or Mac.

Step 3: Download the IPSW file of iOS which is currently running on your device, use the search bar on the right-hand side of this post to hunt for the required files. Once downloaded and saved to a safe location, move to the next step.

You can check which version of iOS you are running by going to Settings > General > About > Version.

Step 4: Launch Redsn0w and click on the Extras button on screen.

Step 5: Now click on the Select IPSW option. Point Redsn0w towards the IPSW file which you downloaded in Step 3. If you’re already running iOS 5.1.1, then point it towards that said firmware and so on. Click on Open when you’ve found the required IPSW.

Step 6: Redsn0w will now ask you whether if you have an older bootrom iPhone 3GS or a new one, read the on-screen instructions very, very carefully before you proceed, as it may potentially lead to the loss of data on your device, or may even brick your device’s radio for good.

Step 7: Now go back to the main screen of Redsn0w and click on the Jailbreak option. After preparing the jailbreak data – which takes a little while – you will be presented to a set of different options.

Step 8: Simply check the Downgrade from iPad baseband and Install Cydia options and click Next. If you’re already jailbroken and have Cydia installed then you do not have to check the Install Cydiaoption.

Step 9: At this point, make sure your device is powered off and unplugged. Read the on-screen instructions on how to put your device in DFU mode, don’t worry it might take a couple of tries to get it right. Once you’re ready, click Next.

Step 10: When you’re into DFU mode, Redsn0w will do it’s thing and proceed with the downgrade of your baseband, don’t be alarmed as this step might take a while, so be patient. And best of all; do not touch your device during the whole downgrade process.

Step 11: If you followed the steps correctly, your iPhone will reboot and will be on the unlockable 05.13.04 baseband. Simply launch Cydia and use the latest version of Ultrasn0w to unlock your device.

Note: Before you begin, it’s necessary to note that this method will only work on devices which are running the 06.15.00 baseband i.e. iphone 3GS/3G.

Read More

Save SHSH blobs for iOS 4.3

Save SHSH blobs for iOS 4.3

Download TinyUmbrella

STeps to save SHSH Blobs:-

Step 1

Run the TinyUmbrella.

(Mac users: Copy the app to your desktop or you’ll get repeating password prompts if you ran the app from within the DMG).

Step 2

Now Connect your iPhone 4, iPhone 3GS, 3G, iPod Touch 4G, 3G 2G, iPad or Apple TV 2G to your computer. TinyUmbrella will detect your iDevice.

Step 3

• Make Sure iTunes is closed
• Now Simply Hit the Save SHSH button at Top-Right side of the window.

TinyUmbrella will save SHSH blobs of the latest firmware + all those blobs that you had saved for older firmwares (if any) on Cydia server. This will also generate a ticket to save SHSH blobs for the latest firmware to Cydia server.

Done !

Read More

Fix MobileSubstrate on iOS 4.3

Fix MobileSubstrate on iOS 4.3 after Jailbreak

Your iPhone, iPad, iPod Touch should already be jailbroken on iOS 4.3. 

Step 1

Download this: .deb file.

Step 2

SSH into iPhone, iPod Touch with WIN SCP
or
SSH into iPad

Step 3

Navigate to /var/root/Media/
and create a new folder named Cydia and inside Cydia folder, create a folder called AutoInstall (Folder names are Case-Sensitive)

Step 4

Now copy the downloaded .deb file inside the AutoInstall folder
and reboot your iDevice.

Read More

New WhiteD00r Firmware v4.2 for iPhone 2G, 3G & iPod Touch 1G, 2G.

FEATURES OF NEW WHITED00R FIRMWARE V4.2 FOR IPHONE & IPOD.

1. 

iOS4 User Interface

Whited00r firmwares are based on 3.1.x firmware but it offers a fully modded interface to suite iOS4 one. We are not using Winterboard to achieve this result, so your device will run faster! Unfortunately this firmware can't run iOS4-only applications.

2.

Unlocked

All Whited00r firmwares are jailbroken (with PwnageTool). Latest Cydia is included and fully working. You will find our repo preinstalled. We are also providing unlocked firmwares that include carrier unlock and hacktivation.

3.

Multitasking and Folders

Whited00r firmwares included multitasking and folders. They have been developed by Darlo770. Multitasking is optimized to run on "old" devices with limited ram amount. iPod controls on multitasking dock are working too.

4.

Wallpapers

Whited00r comes with the new iOS4 feature of Home Screen wallpapers. You can easly set it like in iOS4. Moreover, whited00r has the feature of dynamic wallpapers: you can use high resolution images to set Android-like wallpapers.

5.

Native unlocked features

Whited00r unlocks all native features hidden in official Apple firmwares. Battery percentage, Multimedia Messages Service (MMS), tethering via bluetooth and via USB, Tap to Focus in camera, cellular data network fields and Emojii icons are only some examples.

6.

Video Recording

Whited00r includes the best video recording application. It offers the best quality for your videos. Recording quality is better then the one offered by application on AppStore. Moreover video are automatically exported to Photo folder (so you can manage them with iPhoto)

7.

Safari Bookamrks

The Safari browser offers two useful bookmarks: "Search in Page" and a "Flash video converter". The latter enables some kind of flash video in the page you are visiting (like Vimeo or Dailymotion videos). From bookmarks you can also visit the mobile version of whited00r.com and install alphanumeric passcode for your device.

8.

Others Features

You will find other minor features that are not listened here. Whited00r is compatible with iBluenova, A2DP enabler and iBootlace for Andorid installation (dual boot). Visit the forum via "More info" button for power user tweaks.

9.

Whited00r is Free

Whited00r is 100% free and will never use cracked software. Our project is kept alive by donations and sponsors. Please help us! Use "More info" button to donate

GO AND DOWNLOAD ALL FIRMWARES WITH DROP DOWN MENUS HERE - 

http://www.whited00r.com/downloads.html

Read More

Upgrade iPhone 3GS & 3G to Firmware 4.2.1 with Old Baseband <= 5.13.04

By New Boot i mean to say any iPhone 3G or 3GS bought recently ...

Download the Tools Needed :-

1 . Custom firmware for iphone 3Gs / 3G  4.2.1

Download custom firmware iPhone 3Gs

Download custom firmware iPhone 3G

2. Download Redsn0w 0.9.6b

3. Download Apple original firmware

Download original firmware iPhone 3Gs

Download original firmware iPhone 3G

STEPS TO UPGRADE IPHONE 3GS TO FIRMWARE 4.2.1 WITH BASEBAND 5.13.04 OR LESS..

1. Connect your phone with PC and switch off

2. Open redsn0w and choose Original firmware.

3. If you have newboot just press “YES”. If not then please press "NO".

4. now click “Next”

5. Choose “Just Enter pwned DFU mode right now”

6- now click “Next” again “Next” and follow the screen.

7. Put the Phone in DFU Mode.

After that open itunes and press “Shift + Restore” and choose custom firmware 4.2.1

it will finish very quickly

Once you update you firmware

1. Connect your phone with PC and switch off

2. Open redsnow and choose Original firmware

3. If you have newboot just press “YES”. If not then please press "NO".

4. now click “Next”

5. Choose Only “Install Cydia”

6. now click “Next” again “Next” and follow the screen.

7. Put the Phone in DFU Mode and after that it will do the needfull jailbreaking. Your Screen will Flash"white" once.

Thats it you are Done !!!

If you r getting White Cydia Icon just switch of your phone and open redsnow choose firmware 4.2.1 and choose the option “Just boot tethered right now” and click “next” again “next” then follow the screen then you will see the cydia.

Finally you can see your phones is with your old Baseband. now just you can install the ultrasn0w v1.2 from Cydia to unlock your iPhone with older Bootrom.

hea

Read More

Restore & Update iPhone 3Gs To 4.2.1 On 6.15.00 Baseband

Restore A Bricked 3GS New Or Old Bootrom And Can Also Update Your Working 4.1 iPhone 3Gs To 4.2.1 On 6.15.00 Baseband

IF Your iPhone Is Not On 6.15.00 Baseband OR Has Not Crashed While Installing It Then these steps are NOT For You!


Things you need to proceed:-


1>iPhone 3GS 4.2.1 Custom Firmware.
2>iPhone 3GS 4.2.1 Original Firmware.
3>Redsn0w 0.9.6.b6.


Steps you need follow:-


1. If Updating Or Restoring To 4.2.1 Open Redsn0w And Select The Official Firmware, Then Deselect ALL Options And Only Check "Just Enter Pwned DFU Mode Right Now"

2. Once Finished, Open iTunes And Hold Shift Or Option On Mac And Left Click Restore In iTunes, Then Select The 4.2.1 Custom Restore File For 3Gs ( Depending On Your Device)

3. After Restore iPhone 3Gs Is Locked You Must Jailbreak So Watch This To Jailbreak And Hacktivate So Open Redsn0w Again And Select Official 4.2.1 FW Then Only Select The "Cydia" Option. After Reboot NEW BOOTROM 3Gs Devices Will NOT Boot So Watch This And Select The 4.2.1 Firmware In Redsn0w:http://www.youtube.com/watch?v=hhU1zU...

4. Open Cydia And Install Ultrasn0w To Unlock! That's It !


PLEASE Subscribe And Rate :)

Read More

Restore & Update iPhone 3G To 4.2.1 On 6.15.00 Baseband

Follow the steps mentioned below.


Things you need to proceed:-


1> iPhone 3G 4.2.1 Original Firmware
2> iPhone 3G 4.2.1 Custom Firmware
3> Redsn0w 0.9.6.b6

This steps are only valid  when you wanna Restore A Bricked 3G new or Old Bootrom And Can Also Update Your Working 4.1 iPhone 3G To 4.2.1 On 6.15.00 Baseband.


IF Your iPhone Is Not On 6.15.00 Baseband OR Has Not Crashed While Installing It Then theses steps are not valid.


Steps :-


1. If Updating Or Restoring To 4.2.1 Open Redsn0w And Select The Official Firmware, Then Deselect ALL Options And Only Check "Just Enter Pwned DFU Mode Right Now"

2. Once Finished, Open iTunes And Hold Shift Or Option On Mac And Left Click Restore In iTunes, Then Select The 4.2.1 Custom Restore File For 3G ( Depending On Your Device)

3. Open Cydia And Install Ultrasn0w To Unlock! That's It you are done.... 




PLEASE Subscribe And Rate :)

Read More

FolderEnhancer supports iOS 4.1 firmware

FolderEnhancer has been updated to now supports iOS 4.1 firmware. FolderEnhancer is a jailbroken tweak which brings some cool improvements to the iOS folders capability.

iOS 4 brought with it the ability to put apps and bookmarks into folders. Unfortunately, the implementation is quite limited. FolderEnhancer takes this feature and improves upon it, making it a viable solution for organizing and accessing your apps.

FolderEnhancer Features

• Open folders faster.
• Add up to 320 icons to a folder (20 pages, 16 per page).
• Create folders inside of folders.
• Create folders on the dock.
• Supports Iconoclasm for custom layouts inside of folders.
• Extends MultiIconMover to allow moving multiple icons into/out of folders.
• Options include hiding the folder name and wallpaper, as well as disabling animations.

What’s New In This Version

• NEW: Added support for iOS 4.1.
• FIX: With “Close on App Launch” OFF, closing an app launched from a folder while the task switcher was visible would cause the folder to fail to reappear.
• FIX: With wallpaper off, toggling the task switcher would cause parent folders to become visible, appear stacked.

You can purchase and download FolderEnhancer from the Cydia Store for $1.99. CategoriesSB owners can get the app at $0.99 until the end of October.

Read More

Jailbreak Your iPhone 3GS, iPhone 4 Using Greenpois0n (Windows)

These are instructions on how to jailbreak your iPhone 3GS and iPhone 4 using Greenpois0n for Windows. Greenpois0n only supports iOS 4.1 firmware. Use Limera1n if you want to jailbreak iOS 4.0, iOS 4.0.1, iOS 4.0.2.

Remember: Do not update to iOS 4.1 if you need the unlock. Ultrasn0w does not support that baseband yet. The only exception is the iPhone 4. You can update to iOS 4.1 without upgrading your baseband by followingthis tutorial.

Step One
Open your web browser of choice and navigate to http://www.greenpois0n.com. Click the Windows link at the bottom of the screen.


Step Two
When prompted save the download to your desktop




Step Three
Double click the downloaded gp_win_rc2.zip file then drag the greenpois0n.exe file to the desktop. Doublegreenpois0n.exe from the desktop to launch the application




Step Four
Power off your iPhone then click the large Prepare to Jailbreak (DFU) button


Step Five
You will now be instructed on how to place your iPhone into DFU mode. You can get help with this here. 

You will be asked to press and hold the sleep button for 2 seconds.


Continue holding sleep; press and hold home for 10 seconds.


Release sleep button; continue holding home for 15 seconds.


Step Six
Once your iPhone is successfully in DFU mode you may click the Jailbreak button.


Step Seven
Greenpois0n will now jailbreak your device




Step Eight
Click the Quit button once the software application has completed.


You'll notice some verbose mode text scrolling on your device. 

Step Nine
After the iPhone restarts you'll notice a new Loader application on your Springboard. Press to launch it.


Step Ten
Press to select Cydia then press the large Install Cydia button that appears.


Step Eleven
Once Cydia has installed successfully you will be asked if you want to remove Loader from your device. Press the Remove button then press the Home button. Your device will now automatically reboot.


Step Twelve
When your iPhone has restarted you can run Cydia. Let it do all the necessary updates then follow our Unlocktutorial if possible for your device.

Read More

Save SHSH blobs for iOS 4.1 (iPhone 4, 3GS, 3G, iPod Touch 4G, 3G, 2G)

How to Save SHSH blobs for iOS 4.1

Limera1n is out to jailbreak iOS 4.1. Now, it’s best time to save SHSH blobs for iOS 4.1 so that you may always downgrade to iOS 4.1 and jailbreak your iPhone and iPod Touch. In this guide you’ll learn how to save SHSH blobs of iOS 4.1 for iPhone 4, 3GS, 3G, iPod Touch 4G, 3G, 2G with a single click usingTinyUmbrella.


NOTE:

• You can save SHSH blobs for iOS 4.1 only if it’s being signed by Apple. Go grab your SHSH blobs for iOS 4.1 before it’s too late. Apple stops signing a firmware when an updated version is out.
• TinyUmbrella can save SHSH blobs regardless of jailbreak.
• With TinyUmbrella you can save SHSH blobs for iOS 4.1 even if you’re on older iOS.

Let’s save SHSH blobs for iPhone and iPod Touch iOS 4.1.

Save SHSH blobs for iiOS 4.1

• Download TinyUmbrella

Steps to save SHSH blobs for iOS 4.1

Simple Mode

1. Run the TinyUmbrella. (Mac users: Copy the app to your desktop or you’ll get repeating password prompts if you ran the app from within the DMG).
2. Now Connect your iPhone 4, iPhone 3GS, 3G, iPod Touch 3G or iPod Touch 2G or iPad to your computer
3. Now Simply Hit the Save My SHSH button and TinyUmbrella will grab SHSH blobs of the latest firmware for the connected device. This will also generate a ticket to save SHSH blobs to Saurik’s server.

All Done! You have secured your future jailbreak by saving SHSH blobs for iOS 4 using TinyUmbrella. You can find the saved SHSH file under:

Advanced Options

If you’ve SHSH blobs saved via Cydia for an older firmware and want to get those old SHSH blobs into your computer or want to save SHSH blobs without connecting your device (not possible for iPhone 4) simply by providing ECID, then use the advanced options. You can also download latest firmware blobs via Advanced options.

1. Connect your Device to your computer and fire up the TinyUmbrella.
2. Check mark the advanced options.
3. ECID: TinyUmbrella auto detects your iDevice ECID or you can enter manually if device not connected.
4. Device/Version: Select your device and the firmware version for which you have saved SHSH blobs on Saurik server or the latest one.
5. Locations
   Select Cydia or Apple. This is what these options do:
   • Cydia: searches for SHSH blobs on Cydia. If found, then it downloads them to your PC. If NOT found, then it pings Apple server for the blobs and download them to you PC if being signed by Apple and also submits a ticket to Cydia server to save blobs there.
   • Apple: Directly pings Apple server and download SHSH blobs for currently signed firmware to your Computer. It does NOT submit a ticket to Cydia for saving SHSH there or download older blobs.
6. Hit the Save my SHSH button.

This way TinyUmrella will save SHSH blobs for latest firmware or older firmware (if already saved at Saurik server). This will download and save your older SHSH on file, that are already at Saurik server, into your computer.

Now Click on Display SHSH to confirm that SHSH blobs has been saved. There’s also a link “Click here to Open” in the Log (the bottom text section) to view the saved SHSH blobs.

Read More