Downgrade iPhone 3GS / 3G 06.15.00 To 05.13.04 Baseband

Please Follow the steps mentioned below:-

Step 1: Download the latest version of Redsn0w, which is 0.9.14b1 (Windows/Mac), make sure that you have the correct version of said tool for your operating system.

Step 2: Unzip the contents of the downloaded compressed file and save to a familiar location on your PC or Mac.

Step 3: Download the IPSW file of iOS which is currently running on your device, use the search bar on the right-hand side of this post to hunt for the required files. Once downloaded and saved to a safe location, move to the next step.

You can check which version of iOS you are running by going to Settings > General > About > Version.

Step 4: Launch Redsn0w and click on the Extras button on screen.

Step 5: Now click on the Select IPSW option. Point Redsn0w towards the IPSW file which you downloaded in Step 3. If you’re already running iOS 5.1.1, then point it towards that said firmware and so on. Click on Open when you’ve found the required IPSW.

Step 6: Redsn0w will now ask you whether if you have an older bootrom iPhone 3GS or a new one, read the on-screen instructions very, very carefully before you proceed, as it may potentially lead to the loss of data on your device, or may even brick your device’s radio for good.

Step 7: Now go back to the main screen of Redsn0w and click on the Jailbreak option. After preparing the jailbreak data – which takes a little while – you will be presented to a set of different options.

Step 8: Simply check the Downgrade from iPad baseband and Install Cydia options and click Next. If you’re already jailbroken and have Cydia installed then you do not have to check the Install Cydiaoption.

Step 9: At this point, make sure your device is powered off and unplugged. Read the on-screen instructions on how to put your device in DFU mode, don’t worry it might take a couple of tries to get it right. Once you’re ready, click Next.

Step 10: When you’re into DFU mode, Redsn0w will do it’s thing and proceed with the downgrade of your baseband, don’t be alarmed as this step might take a while, so be patient. And best of all; do not touch your device during the whole downgrade process.

Step 11: If you followed the steps correctly, your iPhone will reboot and will be on the unlockable 05.13.04 baseband. Simply launch Cydia and use the latest version of Ultrasn0w to unlock your device.

Note: Before you begin, it’s necessary to note that this method will only work on devices which are running the 06.15.00 baseband i.e. iphone 3GS/3G.

Read More

Upgrade iPhone 3GS & 3G to Firmware 4.2.1 with Old Baseband <= 5.13.04

By New Boot i mean to say any iPhone 3G or 3GS bought recently ...

Download the Tools Needed :-

1 . Custom firmware for iphone 3Gs / 3G  4.2.1

Download custom firmware iPhone 3Gs

Download custom firmware iPhone 3G

2. Download Redsn0w 0.9.6b

3. Download Apple original firmware

Download original firmware iPhone 3Gs

Download original firmware iPhone 3G

STEPS TO UPGRADE IPHONE 3GS TO FIRMWARE 4.2.1 WITH BASEBAND 5.13.04 OR LESS..

1. Connect your phone with PC and switch off

2. Open redsn0w and choose Original firmware.

3. If you have newboot just press “YES”. If not then please press "NO".

4. now click “Next”

5. Choose “Just Enter pwned DFU mode right now”

6- now click “Next” again “Next” and follow the screen.

7. Put the Phone in DFU Mode.

After that open itunes and press “Shift + Restore” and choose custom firmware 4.2.1

it will finish very quickly

Once you update you firmware

1. Connect your phone with PC and switch off

2. Open redsnow and choose Original firmware

3. If you have newboot just press “YES”. If not then please press "NO".

4. now click “Next”

5. Choose Only “Install Cydia”

6. now click “Next” again “Next” and follow the screen.

7. Put the Phone in DFU Mode and after that it will do the needfull jailbreaking. Your Screen will Flash"white" once.

Thats it you are Done !!!

If you r getting White Cydia Icon just switch of your phone and open redsnow choose firmware 4.2.1 and choose the option “Just boot tethered right now” and click “next” again “next” then follow the screen then you will see the cydia.

Finally you can see your phones is with your old Baseband. now just you can install the ultrasn0w v1.2 from Cydia to unlock your iPhone with older Bootrom.

hea

Read More

iPhone Themes Store via Cydia

How to get Themes on iPhone

1. Launch Cydia
2. Go to the Manage tab
3. Tap on “Sources”
4. Now hit the “Edit” and then “Add” buttons.
5. Input the following repo url : http://www.themeitapp.com/repo .
6. Now go to your just added repository and download Theme it.app and start enjoying great themes.

Read More

Restore & Update iPhone 3Gs To 4.2.1 On 6.15.00 Baseband

Restore A Bricked 3GS New Or Old Bootrom And Can Also Update Your Working 4.1 iPhone 3Gs To 4.2.1 On 6.15.00 Baseband

IF Your iPhone Is Not On 6.15.00 Baseband OR Has Not Crashed While Installing It Then these steps are NOT For You!


Things you need to proceed:-


1>iPhone 3GS 4.2.1 Custom Firmware.
2>iPhone 3GS 4.2.1 Original Firmware.
3>Redsn0w 0.9.6.b6.


Steps you need follow:-


1. If Updating Or Restoring To 4.2.1 Open Redsn0w And Select The Official Firmware, Then Deselect ALL Options And Only Check "Just Enter Pwned DFU Mode Right Now"

2. Once Finished, Open iTunes And Hold Shift Or Option On Mac And Left Click Restore In iTunes, Then Select The 4.2.1 Custom Restore File For 3Gs ( Depending On Your Device)

3. After Restore iPhone 3Gs Is Locked You Must Jailbreak So Watch This To Jailbreak And Hacktivate So Open Redsn0w Again And Select Official 4.2.1 FW Then Only Select The "Cydia" Option. After Reboot NEW BOOTROM 3Gs Devices Will NOT Boot So Watch This And Select The 4.2.1 Firmware In Redsn0w:http://www.youtube.com/watch?v=hhU1zU...

4. Open Cydia And Install Ultrasn0w To Unlock! That's It !


PLEASE Subscribe And Rate :)

Read More

Ultrasn0w Unlock v1.1.2 out for iPhone Firmware 4.2.1 3GS & 3G

As per the Dev Team the new Ultrasn0w Unlock for IOS4 firmware v4.2.1 is released. Please go through the instructions provided by the Dev Team below :

" Today we’re pleased to announce our free carrier unlock for iPhone3G/3GS owners with a baseband later than 05.13.04 ".  The unlock for that baseband exploited the AT+XAPP command, thanks to a crash initially discovered by @sherif_hashim (@Oranav also found this crash).  So what hole are we exploiting today, since Apple closed that AT+XAPP hole?  Well, we’re exploiting the exact same hole!

It turns out that the very first iPad firmware 3.2.2 has baseband version 06.15.00 still vulnerable to AT+XAPP.  The iPad baseband is built for the exact same baseband chip as the iPhone3G/3GS — they’re fully compatible! Some of us have been running 06.15 for weeks now on our iPhones in preparation for this release.

Since 06.15 is a higher version than 05.14 or 05.15 (where AT+XAPP is gone), anyone stuck at those versions can simply upgrade to 06.15 to unlock again!  Luckily for us, Apple *still* provides the iPad FW 3.2.2 with this vulnerable baseband right from their own servers. (Grab it now, before they take it down!)

We’ve been busy updating both PwnageTool and redsn0w to make the baseband update as seamless as possible.

1. First up is “PwnageTool 4.1.3 Unlock Edition”.  It has a special dialog box which will ask you if you want to update to the iPad baseband.  You must already have the iPad 3.2.2 IPSW on your computer (see the above link)….so just point PwnageTool at it (or let it find it on its own if you’re in “simple” mode).
2. Directly after PwnageTool 4.1.3 is available, the official ultrasn0w repohttp://repo666.ultrasn0w.com will be updated with ultrasn0w 1.2, which covers iPhone 4 baseband 01.59.00 and iPhone 3G/3GS basebands 04.26.08, 05.11.07, 05.12.01, 05.13.04 and now 06.15.00.
3. Finally, we’ll release an update to redsn0w today for those without Macs and can’t run PwnageTool.  The new redsn0w will give you the option to update your baseband to 06.15 too.

WARNING — YOU DO THIS AT YOUR OWN RISK!  PLEASE UNDERSTAND THE CONSEQUENCES OF UPDATING TO 06.15.

1. There is no way to come back down from 06.15, and there’s no hiding the baseband version from Apple.  You’ll be voiding your warranty in a very obvious way.
2. If some future baseband comes out with a critical fix, you won’t be able to update to it if it remains down in the 05.xx sequence (then again, you wouldn’t update to it if you wanted to keep your unlock anyway).
3. Starting with FW 4.2.1 if you have 06.15 on your iPhone you won’t ever be able to restore to stock firmware (it will fail).  You’ll need to only restore to custom IPSWs (then again, if you’re unlocker you should already be doing that).

Certainly don’t update to 06.15 if you don’t need to!  Only do this if you need the unlock and you’re stuck on 05.14 or 05.15, and you’re willing to assume the above risks.

This PwnageTool also contains a 4.2.1 bundle for iPhone3G owners…for all else, it’s still only 4.1.  If you have an iPhone3GS with an old bootrom, the new redsn0w will handle 4.2.1 for you (in fact it covers 4.2.1 for all devices, even though some of them are still tethered at 4.2.1 until @comex can work some untethering magic).  iPhone3GS users with old bootroms who want to go to 4.2.1 should not use this PwnageTool! Update to stock 4.2.1 first, then use the upcoming redsn0w to update your baseband.

Please feel free to use our comments section for questions.  We have some very knowledgeable and helpful moderators:  angiepangie, Confucious, dhlizard, and Frank55!

Official Bittorrent Releases

PwnageTool 4.1.3  - PwnageTool_4.1.3_Unlock_Edition.dmg.5994102.TPB.torrent

Read More

SkyFire Browser an option to play Flash on iPhone

Experience the world's hottest mobile browser with Skyfire 2.0 for iPhone.

Vibrant Video

watch videos, including Flash, while browsing your favorite sites

Explore Related

find related content & media to the page you're browsing

Social Sharing

one-click sharing with facebook and twitter

User Agent Switching

load pages for either mobile or desktop

Private Browsing

keeps your browsing private, with no data trail

Read More

FolderEnhancer supports iOS 4.1 firmware

FolderEnhancer has been updated to now supports iOS 4.1 firmware. FolderEnhancer is a jailbroken tweak which brings some cool improvements to the iOS folders capability.

iOS 4 brought with it the ability to put apps and bookmarks into folders. Unfortunately, the implementation is quite limited. FolderEnhancer takes this feature and improves upon it, making it a viable solution for organizing and accessing your apps.

FolderEnhancer Features

• Open folders faster.
• Add up to 320 icons to a folder (20 pages, 16 per page).
• Create folders inside of folders.
• Create folders on the dock.
• Supports Iconoclasm for custom layouts inside of folders.
• Extends MultiIconMover to allow moving multiple icons into/out of folders.
• Options include hiding the folder name and wallpaper, as well as disabling animations.

What’s New In This Version

• NEW: Added support for iOS 4.1.
• FIX: With “Close on App Launch” OFF, closing an app launched from a folder while the task switcher was visible would cause the folder to fail to reappear.
• FIX: With wallpaper off, toggling the task switcher would cause parent folders to become visible, appear stacked.

You can purchase and download FolderEnhancer from the Cydia Store for $1.99. CategoriesSB owners can get the app at $0.99 until the end of October.

Read More

Jailbreak Your iPhone 3GS Using PwnageTool (Mac) [4.1]

These are instructions on how to jailbreak your iPhone 3GS on iOS 4.1 using PwnageTool for Mac.

Step One
Make a folder called "Pwnage" on the desktop. In it, you will need a couple of things. PwnageTool 4.1, found here

You will also need the 4.1 iPhone firmware. 
4.1.0 (3GS): iPhone2,1_4.1_8B117_Restore.ipsw

When downloading the IPSW file, it is best to download it with Firefox since Safari often auto extracts it!


Step Two
Double click to mount PwnageTool then drag the PwnageTool icon into the Pwnage folder. 


Then from the Pwnage folder double click to launch the PwnageTool application.


Click Ok if presented with a warning.


Step Three
Click to select Expert Mode from the top menu bar


Step Four
Click to select your device. A check-mark will appear over the image of the device. Click the blue arrow button to continue. 


Step Five
You will be brought to the "Browse for IPSW" page. Click the Browse for IPSW... button.


From the popup window select your firmware from the Pwnage folder then click the Open button.


Step Six
You will then be brought to a menu with several choices. Click to select General then click the blue arrow button.


The General settings allows you to decide the partition size. Check Activate the phone if you are not with an official carrier then click the blue arrow button.

NOTE*: Deselect Activate if you have an iPhone legitimately activated on an official carrier.


The Cydia settings menu allows you to create custom packages so you do not have to manually install the necessary them later.


Click to select the Download packages tab. Then click the Refresh button to display all the available packages. Double clicking the package you want will download it and make it available in the Select Packages tab. 


Checkmark the ones you want then click the blue arrow button.


The Custom Packages Settings menu displays listed package settings for your custom IPSW. For know leave these settings as is. Click the blue arrow button to continue.


Step Seven
You are now ready to begin the pwnage process! Click the Build button to select it then click the Blue arrow button to begin.


Step Eight
You will be asked to save your custom .ipsw file. Save it to your Pwnage folder you created on your Desktop.


Your IPSW is now being built. Please allow up to 10 minutes.


You will be asked to enter your administrator password. Do this then click the OK button.


Step Nine
Once your ipsw has been built you will be asked to connect your iPhone to the computer. Once it detects your device PwnageTool will guide your through the steps to putting your iPhone into DFU mode.


Press and hold the power and home buttons for 10 seconds.


Then release the power button and continue holding the home button for 10 seconds.


Once your iPhone is successfully in DFU mode, PwnageTool will prompt you to launch iTunes.


Step Ten
Once In iTunes, hold the Alt/Option key and click Restore.


Step Eleven
Navigate to the Pwnage folder on your desktop using the dialog window that appears. Select the custom IPSW that was created and click the Choose button.


Step Twelve
iTunes will now restore the firmware on your iPhone. This can also take up to 10 minutes. Once done you will be rebooted into jailbroken iOS 4.1!

Read More

Jailbreak Your iPhone 3GS, iPhone 4 Using Greenpois0n (Windows)

These are instructions on how to jailbreak your iPhone 3GS and iPhone 4 using Greenpois0n for Windows. Greenpois0n only supports iOS 4.1 firmware. Use Limera1n if you want to jailbreak iOS 4.0, iOS 4.0.1, iOS 4.0.2.

Remember: Do not update to iOS 4.1 if you need the unlock. Ultrasn0w does not support that baseband yet. The only exception is the iPhone 4. You can update to iOS 4.1 without upgrading your baseband by followingthis tutorial.

Step One
Open your web browser of choice and navigate to http://www.greenpois0n.com. Click the Windows link at the bottom of the screen.


Step Two
When prompted save the download to your desktop




Step Three
Double click the downloaded gp_win_rc2.zip file then drag the greenpois0n.exe file to the desktop. Doublegreenpois0n.exe from the desktop to launch the application




Step Four
Power off your iPhone then click the large Prepare to Jailbreak (DFU) button


Step Five
You will now be instructed on how to place your iPhone into DFU mode. You can get help with this here. 

You will be asked to press and hold the sleep button for 2 seconds.


Continue holding sleep; press and hold home for 10 seconds.


Release sleep button; continue holding home for 15 seconds.


Step Six
Once your iPhone is successfully in DFU mode you may click the Jailbreak button.


Step Seven
Greenpois0n will now jailbreak your device




Step Eight
Click the Quit button once the software application has completed.


You'll notice some verbose mode text scrolling on your device. 

Step Nine
After the iPhone restarts you'll notice a new Loader application on your Springboard. Press to launch it.


Step Ten
Press to select Cydia then press the large Install Cydia button that appears.


Step Eleven
Once Cydia has installed successfully you will be asked if you want to remove Loader from your device. Press the Remove button then press the Home button. Your device will now automatically reboot.


Step Twelve
When your iPhone has restarted you can run Cydia. Let it do all the necessary updates then follow our Unlocktutorial if possible for your device.

Read More