Apple has just introduced a new firmware 3.1.3 for iPhone.
You can Download the latest Firmware for iPhone from the below mentioned links:-
Original Iphone Firmware (3.1.3) 2G: here
Original Iphone Firmware (3.1.3) 2G: here
After this please download the RedSn0w v0.9.4 from here (windows) and from here (Mac).
Now applying the old ways of pwning an iPhone 2G.
1)Update your iPhone 2G to the latest firmware v3.1.3.
2)Run the Application Redsn0w v0.9.4 and browse the firmware v 3.1.2 which is the oldest firmware and click on Next.
3)After this Check Options “Install Cydia”and “Unlock” options for iPhone 2G and click on Next.
4)Now make sure your device is both OFF and PLUGGED IN to the computer before you click “Next”.
5)Connect your device in recovery mode by pressing the Power and buttons continuously.6)At this stage you will be presented with a screen where you will have to quickly hold “Power” button and then while holding the “Power” button, you will now have to hold “Home” button too. Now after few seconds release “Power” button but keep holding “Home” button until installation begins.
7)Sit back and enjoy while redsn0w will do all the rest for you. Once done, your iPhone 2G will restart automatically and you will find it jailbroken with iPhone firmware version 3.1.3.
If in between the steps Redsn0w ask for Bootloader files, select the Bootloader file 4.6 and 3.9 after downloading it from - BL 3.9 - BL 4.6
Please dont try these steps on 3G or 3GS, your iPhone will get locked and will not recover.
Now applying the old ways of pwning an iPhone 2G.
1)Update your iPhone 2G to the latest firmware v3.1.3.
2)Run the Application Redsn0w v0.9.4 and browse the firmware v 3.1.2 which is the oldest firmware and click on Next.
3)After this Check Options “Install Cydia”and “Unlock” options for iPhone 2G and click on Next.
4)Now make sure your device is both OFF and PLUGGED IN to the computer before you click “Next”.
5)Connect your device in recovery mode by pressing the Power and buttons continuously.6)At this stage you will be presented with a screen where you will have to quickly hold “Power” button and then while holding the “Power” button, you will now have to hold “Home” button too. Now after few seconds release “Power” button but keep holding “Home” button until installation begins.
7)Sit back and enjoy while redsn0w will do all the rest for you. Once done, your iPhone 2G will restart automatically and you will find it jailbroken with iPhone firmware version 3.1.3.
If in between the steps Redsn0w ask for Bootloader files, select the Bootloader file 4.6 and 3.9 after downloading it from - BL 3.9 - BL 4.6
Please dont try these steps on 3G or 3GS, your iPhone will get locked and will not recover.
0 comments:
Post a Comment
Do leave your Email address for replying back.